LEVEL UP ON ECO-CONSCIOUSNESS WITH EPSON BUSINESS INKJET PRINTERS
Not all printers are the same. Laser and inkjet printers may look the same on the outside, but it is what’s on the inside that counts. The laser printing process is complicated and comprises many steps such as preheating, charging, exposure, development, transfer and fusing. Fine toner powder is transferred to a sheet of paper through contact and fused with a combination of heat and pressure. In contrast, Epson's inkjet printers are simple, non-contact systems. They deposit ink droplets on the media, without the use of heat.
SWITCH TO EPSON HEAT-FREE INKJET PRINTERS TO ENJOY ADVANCED CUSTOMER BENEFITS
- Save time with consistent high speed printing
No heat is required to warm-up, allowing the printer to print immediately. Consistent high speed printing up to 50 pages per minute is possible, even for high coverage documents.
- Less power consumption saves energy and money
With no fuser unit to heat, reduce energy consumption by up to 85%* compared to laser printers, resulting in cost savings for electricity bills.
- Fewer replacement parts, lower environmental impact
Uses up to 59% fewer replacement parts** than laser printers. No heat damage to the printhead.
- Less intervention increases productivity
With fewer parts to replace and printheads that last longer, the amount of intervention is decreased, providing improved reliability and reduced downtime.
PRECISIONCORE HEAT-FREE TECHNOLOGY
PrecisionCore is the next-generation inkjet printhead technology driving Epson’s inkjet resolution. It merges advanced key component technologies, state-of-the-art MEMS* fabrication and high-precision assembly processes honed over decades.
Epson's proprietary Micro Piezo inkjet technology doesn't use heat in the ink ejection process, and it's this Heat-Free Technology that separates our printers from the competition. Epson’s Heat-Free printers does not require heat in the ink ejection process. Instead pressure is applied to the Piezo element, which flexes backwards and forwards firing the ink from the printhead.
*MEMS (Micro Electro Mechanical Systems): Devices possessing mechanically driven elements, manufactured through the application of semiconductor processing technology.
PRECISIONCORE MICROTFP PRINT CHIP
MicroTFP print chips are the core element of PrecisionCore Heat-Free Technology. By achieving higher precision and greater miniaturization in Epson’s advanced thin film piezo (TFP) technology, the basic performance of this printhead module has been radically improved, and application to a wider range of uses made possible.
The thin film piezo element that drives ink ejection is approximately 1 micron thin (one-hundredth the thickness of a human hair). By closely controlling the voltage applied to such piezo elements, it is possible to fire up to 50,000 shots of ink per second from a single nozzle, to precise positions and in the necessary quantities.
- PrecisionCore Linehead
By optimally arraying 30 of these MicroTFP print chips in a diagonal configuration, Epson has developed a compact linehead that boasts about 28,000 active nozzles. This size-conscious core device contributes to reduced space requirements of the product itself, and successfully enables high-speed performance of printing up to 50 pages per minute, within a compact design.
CUTTING-EDGE INNOVATION TO ACHIEVE MINIATURISATION OF FOOTPRINT
- New Paper Path Design for Consistent High-speed Printing in Compact Footprint
The new A3 colour Linehead Inkjet printer series realises a simpler C-shaped paper route path to deliver efficient and consistent high-speed printing. It can print up to 50 pages per minute in both simplex and duplex printing while keeping a compact printer design.
- Superb Print Quality with Lower Cost, Save Time on Maintenance
Achieve vibrant, water- and smudge-resistant prints with pigment inks. Save on printing costs and reduce downtime with high capacity ink cartridges. Print up to 50,000 pages in black or 30,000 pages in colour without interruption. Periodic parts are available for user self maintenance to achieve maximum up time.
- Reduce Power Consumption By Switching to Epson Heat-Free Printers
Epson Heat-Free Technology uses less power than laser technology because it does not use heat during the printing process. As Epson inkjet printers have no fuser unit to heat, this results in significantly less energy consumption.
- Save Energy And Money With Low Power Consumption
In today’s offices, only central air conditioning and lighting consume more energy than office automation equipment. In fact, printers and MFPs account for as much as 10%** of electric consumption. Replacing laser printers with Epson WorkForce Enterprise can cut printing-related energy significantly. Lower energy consumption also reduces environmental impact because it reduces CO2 emissions.
**Epson research based on data from a commissioned survey conducted in March 2018 by SOMPO Risk Management & Health Care Inc.
DELIVER AN EFFICIENT, USER-FRIENDLY AND ECO-CONSCIOUS OPERATION
- Fewer Replacement Parts, Lower Environmental Impact
Thanks to Heat-Free Technology, Epson inkjet printers use fewer parts that need replacing than in a laser printer, and our printheads are not a consumable. This reduces the environmental burden of manufacturing and recycling the additional resources.
- Certified Environmental Performance
Epson is committed to developing environmentally conscious products, which means that sustainability is considered from conception to completion. Our Epson WorkForce Enterprise Printers comply with some of the world’s most stringent environmental certification standards.
We offer sustainable innovations because we recognise that the choices we make as organisations, individuals or a society will be essential to our shared success.
*Singapore Green Label and Blue Angel Mark application is on-going for AM-C4000/C5000/C6000.
**Japan Eco Mark has been approved for AM-C4000/C5000/C6000.
- Less Intervention Increases Productivity
The Heat-Free structure of Epson inkjet printers means that there are fewer parts that can fail, which reduces the amount of intervention required. As a result, Epson inkjet printers offer improved reliability and significantly reduced downtime.
- Stress-Free Operability
Epson WorkForce Enterprise printers are perfect for the office, reliably delivering prints at high speeds of up to 50ppm while occupying minimal space. The printers come with space and user-friendly configurations such as a hassle-free front-loading design, transparent ink window, and customisable layout.
- Robust Security Features
- Confidential Job
Prevent unattended prints by sending print jobs with a PIN for release in the panel.
- IP Address Filter
Secure the printer by preventing unauthorised devices from connecting to it.
- Panel Admin Mode
Prevent unauthorised users from changing the printer settings by setting a password for the administrator.
- Access Control
Limit the use of the MFP features by account control. Up to 10 user accounts can be set.
- LDAP Address Book
Reduce the risk of information leakage due to mistakes in the target recipient’s email address.
- Connectivity Features
- Standard Connectivity
The device is equipped with USB 3.0 and Ethernet network connectivity as standard allowing users to share it.
- Additional Ethernet Option
Reduce security risks by connecting external devices that need to use the MFP with a separate network.
- Wi-Fi Option
Enables flexible placement of the MFP with Wi-Fi connectivity. It also allows up to 8 devices to connect directly to the printer by Wi-Fi direct.
- Fax Option
Enable fax capability with the fax option. Up to 3 fax options can be installed to expand the line capability.
- Storage Feature with HDD
Improve convenience by storing print data in the internal HDD for convenient reprinting and distribution. Stored data can be downloaded or forwarded to various destinations without the use of additional software.
ENHANCED FINISHING OPTIONS AND SOLUTIONS
- Enhanced Finishing Capability
Increase productivity with advanced finishing such as stapling, hole punching, folding and booklet making.
- Scalable For The Business Requirements
The unit can be upgraded with various options to suit many types of office space and work requirement.
EPSON SOLUTION SUITE
Take advantage of remote management, customise print options and enjoy seamless compatibility with the Epson WorkForce Enterprise. Integrate these into your existing IT infrastructure to improve productivity and increase efficiency. For more information, please visit www.epson.com.sg/software-solutions.
- MFP Options
- Erase Red Colour
Removes red coloured objects in the results of scanned image or copy.
- Print Sets
Print or copy documents of various quantities for distribution to different groups and number of members.
- OCR Option
Enable built-in OCR functionality directly on the device for Scan to Folder and Email without the need to install software. This option also requires the OCR Unit-P1 option.
Enables sending and receiving fax thru IP address. This option also requires at least 1 Super G3/G3 Multi Fax Board option installed.
- Cloud and Mobile Solutions
- Mobile App
- Epson Smart Panel
Control the MFP to print and scan directly from your smart device with access to popular cloud storage services.
- Epson Connect Services
-Epson Email Print
Send a print job to any Email Print-enabled Epson printer from any device that can send an email.
-Remote Print Driver
Print to an Email Print-enabled printer anywhere in the world via the internet with advanced settings from a PC or the Epson iPrint app.
-Scan to Cloud
Send documents through the cloud service directly from the device panel to an email address or to popular cloud storage services without a PC or email server.
- Other solutions:
- Apple AirPrint
- MopriaTM Print Services
- Microsoft Universal Print